Arta Steel Vira banner featuring stainless steel products for industry and architecture
35+ yearsof experience in the steel trade
A broad rangeIndustrial products and grades
International sourcingSelected origins reviewed for each order
Stainless steel and special alloys, sourced with care

Find the right steel for your project with confidence

From bars and sheets to pipes, fittings, and special alloys, Arta Steel Vira supports your purchasing and engineering teams with specification reviews, grade selection, and quote follow-up.

For an accurate quote, provide the grade, dimensions, quantity, and destination.
From the right selection to delivery

Specialist sourcing, focused on project details

We review technical requirements, product form, dimensions, and delivery terms together so your quote request is clear and trackable.

✧

Grade selection support

We consider the application, service environment, temperature, and project standard when reviewing suitable grades.

◈

Specification matching

Clarify product form, dimensions, quantity, and required documents in your quote request.

◇

Availability and origin review

Availability, origin, and lead time are confirmed for each order based on current conditions and its specifications.

⌁

Follow-up through delivery

Once specifications are agreed, shipping terms are coordinated with the order size and destination.

Product Range

From stainless sections to special alloys

Select a product and enter your order details in the form to request pricing and availability. Images are sized for both desktop and mobile.

Availability, origin, and lead times may change. Details are confirmed after we receive each order’s specifications.

Stainless steel bar and Duplex 1.4462

Stainless Steel Bar

Round and hexagonal bars in general-purpose and specialty grades for component manufacturing and industrial machining.

Details & Order Specifications

For bar enquiries, specify cross-section, diameter, length, tolerance, surface condition, and heat treatment. Grades 304/304L, 316/316L, 321, 310S, 410/420, Duplex 2205, and 17-4PH can be reviewed against your project needs. Include the applicable standard and service conditions.

Request a Quote
Industrial stainless steel sheet

Stainless Steel Sheet

Sheets and plates for equipment, tanks, cladding, and industrial components.

Details & Order Specifications

Specify thickness, width, length, grade, finish, and required standard. Finishes range from industrial to decorative, depending on the application. For an accurate quote, provide sheet dimensions, quantity or weight, and required documentation.

Request a Quote
Stainless steel strip coils

Coil & Strip

Stainless steel coils and strip for slitting, forming, and production lines.

Details & Order Specifications

For coils or strip, specify thickness, width, grade, finish, approximate weight, and—if relevant—inside and outside diameters. For slit strip, include the finished width, tolerance, and edge condition. Availability and slitting are reviewed once specifications are received.

Request a Quote
Stainless steel pipes

Stainless Steel Pipe

Welded and seamless pipe for process lines and industrial applications.

Details & Order Specifications

Provide outside diameter or nominal pipe size, wall thickness or schedule, length, manufacturing method, grade, and standard. The process medium, temperature, design pressure, and connection type also matter. Final selection should match the project drawings and engineering requirements.

Request a Quote
Fittings & Flanges Stainless Steel Grade 316

Fittings & Flanges

Elbows, tees, reducers, unions, and flanges in a range of sizes and connection types.

Details & Order Specifications

Specify component type, nominal size, grade, pressure class or thickness, connection type, and standard. For flanges, include class, facing, and bolt-hole pattern; for fittings, specify angle and end type. A photo or technical drawing can clarify the requirement.

Request a Quote
Stainless steel angles and channels

Angles & Channels

L- and U-sections for structures, frames, supports, and industrial equipment.

Details & Order Specifications

For angles, provide leg dimensions and thickness. For channels, provide width, web height, thickness, and length. Grade, surface condition, manufacturing method, and tolerance are also important. Attach a photo or dimensional drawing for non-standard sections.

Request a Quote
Hollow Sections & Profiles Stainless steel

Hollow Sections & Profiles

Square and rectangular sections for structures, equipment, and architectural applications.

Details & Order Specifications

Specify outside dimensions, wall thickness, stock length, grade, finish, and required quantity. For critical applications, include the standard, welded or seamless construction, and quality documents.

Request a Quote
Embossed and patterned stainless steel sheets

Patterned & Tread Plate

Patterned sheets for anti-slip surfaces, industrial cladding, and interior design.

Details & Order Specifications

Confirm the pattern, base thickness, dimensions, grade, and finish before ordering. The raised pattern and end use affect selection and pricing; for architectural projects, send a sample or image of the requested pattern.

Request a Quote
Decorative stainless steel sheets in a range of finishes

Decorative Sheet

Mirror, brushed, patterned, and coloured finishes for architectural spaces.

Details & Order Specifications

Specify finish, colour or coating, base grade, thickness, dimensions, and installation conditions. PVD colour coatings are separate from the base grade; assess compatibility with the environment, cleaning agents, and contact conditions.

Request a Quote
Technical Guidance for Better Decisions

Guides & Related Articles

These guides help clarify order requirements. Confirm the final grade and standard against technical documents and actual project conditions.

Grade Selection

Stainless Steel 304 or 316: Where to Start?

Compare grades based on the environment, process medium, temperature, and fabrication requirements. A grade name alone does not guarantee performance.

Read the Guide

Grade 304 is commonly used in general applications and ordinary environments. Thanks to its alloy composition, grade 316 may be a better choice in some corrosive environments, particularly where chlorides are present. Performance still depends on concentration, temperature, exposure time, design, and maintenance.

For selection, give a materials engineer or project specialist the process medium and impurities, operating temperature, chloride exposure, welding conditions, cleaning method, and design standard. Low-carbon, stabilized, or Duplex grades may also need separate review.

For a quote: Provide the exact grade, product form, dimensions, service conditions, and required certificates.

Buying Guide

Checklist for a Complete Steel Enquiry

Clear specifications help us check availability and prepare a technical and commercial offer more quickly and accurately.

Read the Guide

Include the product name and form; grade and standard; dimensions and tolerances; quantity and unit; surface condition or heat treatment; application and service conditions; destination and required timing; and any required documents or inspections.

If some details are unavailable, send a drawing, photo, previous sample, or equipment specification and clearly identify what is unknown. A grade or availability is not confirmed until documents are matched and the order is approved.

Note: Price, availability, origin, and delivery time must be confirmed for each enquiry on the day it is reviewed.

Pipes & Fittings

What Specifications Are Needed to Order Stainless Steel Pipe?

Diameter and wall thickness are only part of the specification. Construction type, standard, and service conditions also need to be clear.

Read the Guide

Specify welded or seamless construction, outside diameter or nominal pipe size, wall thickness or schedule, stock length, grade, and manufacturing standard. Include end type, tolerances, tests, and material certificates as required by the project.

For elbows, tees, reducers, and flanges, specify size, connection type, schedule or class, angle, and component standard. Pressure and temperature design criteria must be confirmed by the project engineer; this guide does not replace engineering calculations or approval.

Finishes & Architecture

How Do Mirror, Brushed, and PVD Finishes Differ?

Surface finish, colour coating, and base grade are separate specifications and should be stated separately in an order.

Read the Guide

Mirror polish has high reflectivity; brushed or Hairline finishes show uniform linear grain; tread plate has a raised pattern; and PVD can provide colours such as gold, rose gold, or black. These descriptions alone do not identify the base grade or predict service life.

Consider the installation location, humidity and contaminants, hand contact, cleaning method, grain direction, and colour consistency across sheets. For volume orders or façades, approve a sample and confirm the grade and coating with the manufacturer’s guidance.

Selected Grades

Choose a grade for your service conditions

This list is for initial reference. Confirm the final grade against the design standard and actual service conditions.

304 / 304LGeneral and industrial applications
316 / 316LSome corrosive and chemical environments
321Specific high-temperature and welded applications
310 / 310SSome high-temperature applications
410 / 420Martensitic stainless steels
Duplex 2205Strength and corrosion resistance
17-4PHPrecipitation-hardening stainless steel
Inconel / HastelloySuperalloy families

Family names do not replace the exact alloy designation or purchasing standard. Provide the exact code and required documents when requesting a quote.

Industrial Applications

For industries that require careful material selection

Material selection depends on the process medium, temperature, pressure, corrosive environment, and design requirements.

⌂Oil & GasProcess equipment and lines
⌁PetrochemicalsIndustrial parts and equipment
◉Marine industriesWet and corrosive environments
▤Food & PharmaceuticalEquipment and machinery
▦Construction & ArchitectureSections and decorative surfaces
A variety of decorative stainless steel sheet finishes
Your Industrial Supply Partner

Mehdipour Trading
Over 35 Years of Experience

With extensive steel-trade experience, Arta Steel Vira supports industrial customers in sourcing stainless steel and special alloys—from specification review and grade selection to availability, origin, and delivery coordination.

Depending on the product and order, sourcing options from India, China, and Europe may be reviewed. Each offer is confirmed after enquiry and review of project requirements.

✓Specification and dimension review
✓Grade matching guidance
✓Availability and origin enquiry
✓Delivery coordination
Describe your project needs
Meet the Team

Management & the Arta Steel Vira team

Team roles and names follow the company’s published organization chart. Photos are shown only where they were available on the original site.

M
Chief Executive Officer

Mehdipour

S
International Trade Manager

Saman Lajvardi, Eng.

L
Finance Manager

Latif Mehdipour

M
Sales Specialist

Mehran Mehdipour

V
Accounting Manager and Specialist

Vahid Zarrinkafsh

S
Finance and Accounting Specialist

Saeed Zarrinkafsh

A
Finance Clerk

Abolfazl Khodayari

M
Sales Specialist

Mehrdad Nasiri

Source: Organization chart on the original website

Clear, Step by Step

The Quote and Order Process

Clear information from the start makes review and follow-up easier.

01

Send Specifications

Provide the product, grade, dimensions, quantity, and destination.

02

Technical and Availability Review

The order requirements and sourcing options are reviewed.

03

Receive an Offer

Price, terms, origin, and delivery time are provided.

04

Confirmation and Delivery

Once agreed, final details and shipment are coordinated.

Company Contact Details

Contact Us

Call, email, or visit us using the contact details below. Our team can help with product enquiries and order follow-up.

Request a Quote

Request a Quote

For a product enquiry, enter the specifications in the form and prepare a message for the sales team.

Quote Request Form

Complete the form and send the prepared message to the sales team.

This form does not send or store data on a server. It prepares a request for you to copy.

FAQs

Before You Send an Enquiry

What information is needed for a quote?

Provide the product, grade or standard, dimensions, quantity, and destination. If you are unsure of the grade, describe the application and service conditions.

Are all products always in stock?

Availability and lead times change. Request current information for each order.

How do I choose the right grade?

Review corrosion conditions, temperature, pressure, and the design standard with the project engineer or technical lead. Our sales team can help match specifications.

Can you review different sourcing origins?

Depending on the product and specifications, sourcing from selected origins in India, China, and Europe may be reviewed. The origin is stated in the offer for that order.